Forklift approaches
The vehicle enters the configured sensor range near the roll-up door.
Forklift-triggered facility automation
Open roll-up doors before the forklift reaches them.
Detect an approaching forklift and trigger the existing roll-up door switch or motor automatically—without requiring the operator to reach for a pull cord.
- ✓ Configurable opening distance
- ✓ Existing-door integration
- ✓ Optional two-sided alerts
Automatic access
Approaching vehicle detected
Vehicle input
Forklift presence
Door type
Industrial roll-up doors
Connection
Door switch or motor
Installation
Retrofit or new build
Automated passage
The door responds to the forklift—not a pull cord
The sensor identifies a forklift at the configured approach distance and signals the existing door control so the opening is ready for passage.
Door opens automatically
The sensor output activates the connected door switch or motor for passage.
Door closes after the area clears
The door returns to its normal configured state when no forklift is nearby.
How it works
A practical connection to the existing door system
Installation is designed around the door, traffic direction, and safe trigger point in your facility.
Review your door application- 1
Position the forklift sensor
Mount the sensor at an appropriate location near the door and vehicle approach.
- 2
Connect to the door switch or motor
Route the sensor output to the existing opening control so detection can trigger the door.
- 3
Configure the trigger distance
Set how far the forklift should be from the door when the opening sequence begins.
- 4
Add alerts when needed
Optionally notify pedestrians and forklift operators on the other side of the door with audio and visual alerts.
Retrofit-friendly automation
Improve the workflow without replacing the door
The plug-and-play system can connect to many existing roll-up doors with little to no modification and expand as operational needs change.
Reduced operator distraction
Operators do not need to reach for a door-opening cord while approaching.
Existing-door integration
Connect detection output to the installed opening switch or motor.
Expandable design
Add capabilities as traffic patterns and facility requirements evolve.
Two-sided awareness
Optional alerts can warn people and vehicles beyond the door.
Build around your traffic flow
Ready to automate a roll-up door?
Tell us about the door, existing controls, forklift approach, and desired trigger point. We’ll help evaluate the right configuration.
